Ford F250 EVO-ALL & THARFOR1 Install Question

Question

I want to install this as a stand alone remote start only. After hooking up the T Harness, what other connections must be made to make this work?

Answer 1

Hi Michael,

 

All the physical connections are outlined in the installation guide on page 6/16; STAND ALONE EVO-ALL & THAR-FOR1 (T-Harness) & Ford - Revision 20131217

To vehicle:

• Can-Hi
• Can-Low
• Driver Door Pin
• Lock
• Unlock
• Parking Lights (optional)
• Orange wire of 20-pin white connector straight to ground if the truck has a factory alarm

 

From EVO to T-Harness:

• Yellow  (careful not to use yellow/black by accident)
• Light Blue / Black
• Light Blue

 

If you want to use Stand Alone, make sure the appropriate options in the EVO are also turned on.