Need Help With Fortin Evo-All and Astrostart.

Question

I am installing a AstroStart Rss2524 remote start with a Fortin Evo-All module and its going into a 2014 Honda Push to start Odyssey.  The firmware i am using on the evo all module is honda 73.12.  There are two problems that i am having.  One is the door locks no matter what i do i can only get the drivers door to unlock.  I have tried to do a double pulse unlock output on the astro start,  and turning on and off drivers door unlock only on the fortin module as well as double pulse locks on the fortin module and still the module will only unlock the drivers door no matter how many pulse i send to it.  Astro start uses D2D protocol on the data wire and i have selected this in the options and still cant get the other doors to unlock every time it just pulses the drivers door unlock.  the other problerm that i am having is the fortin module is not syncing with the factory keyless and reflecting those changes on the aftermarket remote.  So if i unlock the doors with the astrostart and lock the door with the factory keyless entery it wont reflect that change on the astro start remote, where both of your competitors modules will.  Please Help!!!!

Answer 1

Hi Mark,

 

Seems that datalink is giving you the problems at the moment.

 

Testing to see if the EVO is working correctly will be very easy.

1. To test the door locks. Physically double pulse the purple/white unlock input on the EVO using a jumper connected straight to ground.
2. For door statuses you will need either a multimeter or a logic test light (that can test ground) to test the hardwired outputs on the EVO.