2016 Honda Odyssey drivers sliding door

Question

I have a 2016 Honda Odyssey that I have installed a remote start on. It uses the Evo-All module, and I've checked wiring 50+ times. The issue we are having is that the drivers side rear sliding door does not function with the buttons inside the vehicle. It will operate with the key fob, but only when the vehicle is not running. If it is running, it does not work from the key fob. I've wired in the relays, but I would love to see a wiring diagram to confirm I have it wired correctly. I've had proble, after problem with this thing. The rear lift gate / door also does not operate if the vehicle is on.

 

Any idea how to resolve this issue?

Answer 1

Couple of things here, 

1. The module replicates the OEM remote commands on CAN while the car is off. If the OEM does not allow the doors or trunk to open while the engine is on/running, neither will the EVO. 
2. The extra wiring in the guide is actually to the sliding door switches, so if one switch is not working , it would not work with the aftermarket.
3. Pretty sure ive seen disable buttons in these vans that make basically turn off those sliding door buttons. May want to look in the center console, above the rear view mirro, or maybe on the A-pillar itself for an On-Off type switch.