Remote Programming RFK441 to Evo One

Question

I installed Evo-One with THAR-ONE-KHY1 Harness on 2009 Kia Borrego.  No immobilizer. Used FlashLink to update, configured the EVO One and all seemed to go well.  I dont have any factory remotes so I bought the RFK441 remote kit and RF-A2A Harness.  When I plug the anntannae wire into EVO one I get one LED flash on the anntanae end.  Then nothing.  Turn key on and anntanae LED does not light up,  Hit brake pedal 4 times and no LED lights up on anntanae dongle.  I have anntane wire plugged into the evo one (blue plug).  Im not using the RF-A2A harness.  Am I supposed to use the harness?  None of the RFK441 remotes do anything when buttons pressed.  It appears the unit wont go into programming mode to allow me to connect the remotes to the unit.  Any ideas? Thanks,.

Answer 1

Hello,

Programming is as follows

1- ignition ON-OFF-ON (the blue led on the antenna should turn on)

2- Brake pedal 4x (after the 4th press the blue led on the antenna should start blinking rapidly)

3- press + followed by lock on each remote youd wish to program.

 

You do not use the rfa2a harness.

Best regards.