Evo ONE with CARLINK ASCL6 and T harness in a 2022 tundra locks not working via app

Question

Everything programmed and working minus the locks via the CARLINK app. The parking lights flash and mirrors start to fold in during lock but nothing from the lock.

Several ofthers are having the same exact issue

Any help would be awesome.

Thanks -B

Answer 1

Hello,

I have just a few questions first so that I may better assist you.

What is the S/N number on the back of the evo-one?

Was Fortin protocol set in the carlink app?

When you send lock from the app, what do the leds on the evo-one do? Same question but send unlock.

When you send remote start does the vehicle start? Also do you get the confirmation in the app that the vehicle is running?

Best regards

Comments

When you turn ignition on the blue led should begin to flash rapidly, then you turn the ignition off and press unlock on the OEM remote.

---

I got it. disconnected battery to truck for a few min and tried again.

Its decrypting now and im getting an error that the dcryptors limit has been reached for this car?

---

Yeah that can happen when it gets run to many times. I will send it off to get reset right away. Please note dcryptor reset can take 24-48 hours. Once it is reset you will no longer get the error when you click on send data.

---

THANK YOU DEREK! Everything working as it should now. Even the tailgate via the app!

Cheers!

---

Glad to hear you got it going!

Best regards.