How and where do i flash EVO-ONE to 0.50. cant seem to find out how to do it

Question

service no. 002b03 046306

Answer 1

for the Drone?

I will see to get that firmware added to the Hardware 3. It's tagged only the hardware 5 and 7 at the moment.

Answer 2

it's available for the hardware 3 evo-one now

Comments

toggle flash link into remote starter mode which willl be indicated in lower right hand conrner. Then once module is plugged in go to evo-one updates and scroll down select 0.50 then select the green flash button. Once its completed unplug the module and it is ready to go!

as robert mentioned only hardware 5 and 7 at the moment soon to be hardware 3

---

what about service # 002B01 0060806? can you check pls

---

that service number is not working

---

What do you mean "not working"? Do you mean that that hardware revision was tested and found to be non-compatible, or that the service number I typed in was incorrect?

---

When that number is entered it does not work the number was written incorrectly. But if it has a 01 after the B this would mean it is a Hardware one. As previously mentioned hardware 3,5 & 7 at this time.

---

have they been able to verify the firmware upgrade with hardware one? i was told on the phone that i would have an answer by now.

---

I just plugged in my hardware 1 evo-one and firmware 0.50 was available.

Should be good on your end now also.