Murano 2011 Brake Lights Flash but doesn't start

Question

Hello, I just finished installing the Evo NIST1 and whenever I press the key thrice, it receives the signal, both the parking lights and the brake lights turn on, and after 5-10 seconds, it fails to start, and the brake lights (and parking lights) flash three times and turn off completely. I did all the wiring correctly (I'm pretty sure) anyone have any ideas?

Answer 1

so it happened to me on the Nissan juke. When the fortin was starting up, I pressed the brake and held it until it started. then I added a relay. on the relay coil, a minus was supplied from the ignition (via a transistor). we cut the wire going to the brake. one side is connected to the coil and to the contact 30, and the other side to the contact 87