EVO-ALL vs EVO-ONE

Question

I installed a EVO-ALL in a 2007 dodge diesel and hate the fact that the starter stays engaged too long!  I have read in other postes that it is no adjustable in my modle year.   If i buy a EVO-ONE will it give me adjustale starter relese times?

Answer 1

Please flash firmware 0.27 into the module then re program it into the vehicle and tell me if the crank time is better.

Comments

I have tried that but I will try it again.  It seemed to be about 4 seconds.  The truck really only needs about a 2 second crank to start and if it’s cold and needs extended crank times it will fire off on the evo-all’s second attempt.

---

I tested firmware .27 with no luck. It still over cranks!  In the comments on .27 it says “max crank 4sec”.  Crank  time is the same possibly a little better but I’m going to blow up my starter soon.  Will the EVO-ONE allow me to adjust crank times?

 

Thanks for any help!!!

---

This person had the exact same issue with the exact same model year pickup with the exact same results.  

https://fortin.ca/en/qa/50013/2007-ram-cummins-starter-runs-for-1-2-seconds-after-engine-starts?show=50013#q50013

My pickup was made half way through 2007.  Is it possible that it’s firmware needs to be set for 2008?

 

---

Yes the evo-one has a tachless setting that allows you to adjust crank time.

---

Tried other version 74.18 I think it was, as recommended on the phone and a few others, still no luck.  Ordered evo-one and will poste how it works when installed.  

Thanks for the help!