Car not rearming while running on remote start or after shutting down by remote starter

Question

I am looking for help on my car unlocking issue when running on remote start and staying unlocked after remote start and also getting unlocked immidetaly even I press lock button while it is running on remote start.

After speaking with some one on phone with fortin, I disabled option D2 since some one told I dont need to do this from evo-all and I need to do this from crimestopper rs4-g5. This doesnt work.

Then I selected options 8 in rs4-g5 which is to lock after remote start and it still do the same

Then I selected option 10 to off which is not to unlock before remote start to just test this out of curosity. I am suprised car is still getting remote started. I dont know why my alarm go off at this point. since I switched off options to unlock before remote start in both rs4-g5 and evo-all

Then finally  I enabled option D5 in evo-all thinking that may help in lock the door after remote start, but still not working.

I ran out of options. can someone please help.

Answer 1

Is there a key in the vehicle because I'm pretty sure Toyota's will auto unlock if it senses a key in the car.

Comments

I tested with both key inside and key outside the car and it is unlocking the door both times. I just observed that it is also showing door open light while running on remote start

Answer 2

For anyone having this kind of issue on your car, check door pin wire. In my case as per fortin I connect GWR wire to door pin which is forcing car to unlock after remote start. I removed this wire and it is staying in lock mode after remote start.

So to switch off auto headlight, I may need to use rearm wire from rs4, I have to try that out and at this point I really dont care if they stay on too..