Dcyrptor not working, also cannot get pass step 3 programming

Question

Error transmission failed check usb cable, cable has good connection, but it still gives me Receive ERROR after trying again

Also cannot get pass step 3 after blue light is on, then i turn the ignition to the on position, with no indication of rapid blue lights, please help!

Can bus is connected and good.

Answer 1

What is the service number to the module?

Comments

S.N=002B04 013259, previously one of the tech support manage to program it for me and it made it to step 5 with the rapid blue light indicator, but then it stop there. Not sure what to do at that point.

---

Once you get the blue led to flash you turn the ignition off and plug it into the flash link updater to perform the dcryptor process.

---

Ok, I tried 3 attemp to get the flashing blue led...it flashes, but when I turn off the ignition the red and yellow does not flash, so what maybe the issues here...so I skip that and actually try to dcrypt it and it still showing issue on the dcryptor page(Error transmission failed) receive error)

---

if you just turn the ignition off and try it then, does it work?

---

Meaning the flashing blue led...no

---

you say it doesn't work, how are you trying to remote start the vehicle once you get the blue led to flash and go out.

---

I am following all the steps? I am trying to get it to program into the car am I missing something here?

---

how are you trying to remote start the vehicle though? rf kit or OEM remote?

---

OEM, I am trying to get pass the Dcrpyting program procedure, havent gotten to the remote part just yet.

I have the Evo one(all in one) with a (thar nis2).

Forgot to mention its a manual transmission.

---

Do i need an RF KIT?

---

you need to first enable option C1 in the bypass setttings

and enable option 38.2 in the remote starter settings (not 38.4)

-----

if it's manual transmission you need to wire the clutch

----

you will most likely need an RF-KIT. 3xLock start is not listed on the website

https://fortin.ca/en/vehicles/infiniti/g35/2006-intelligent-key/

---

So even if i have the T-harness, i still need to tap into the wire in clutch? if so How can i do that?
What is the color to and from? also do i need a transmitter to go with the evo one for the remote start? which RF kit is compatible with the evo one all in one Manual transmission?

 S.N=002B04 013259

Much Thanks!

---

So even if i have the T-harness, i still need to tap into the wire in clutch? if so How can i do that?
What is the color to and from? also do i need a transmitter to go with the evo one for the remote start? which RF kit is compatible with the evo one all in one Manual transmission?

 S.N=002B04 013259

Much Thanks!