can t program

Question

i have a 2007 ram 1500 i installed  evo-all and the t harness connected the yellow wires together  the purple and green with red stripe together my connector on the left of colum with black connector only has 4 wires so it says to use diagram c which i did .the lights cycle as per instruction but it gets stuck on solid blue light.i installed the lates software what am i missing

Answer 1

With the key on,  if the blue light stays on, the module is not seeing ignition, 12v, on the yellow.

Comments

is the 12volts live all the time.can it be connected anywhere for 12 volts

---

do i disconnect the yellow wire from t connector and power it up live with the key on