2011 Wrangler 3X Lock remote start with evo All with add on locks

Question

Hi

i have a 2011 Jeep Wrangler I put in add on locks with remotes kit and want to install Evo All

3x lock remote start. I have a PAC TR-7 universal trigger output module to use but

not sure how to get it to all work. I have universal RF crime stoppers remote kit for evo All that I am adding to the evo All.

What wiring setup chart should I use?

 

Thanks

Steve

Answer 1

Evo-CHRT5 and flash link updater would be the 2 parts.

As long as the vehicle is automatic transmission, you would follow the stand alone installation and connect the tr-7 trigger to the yellow/black trigger on the evo.

When yellow/black is grounded the vehicle will remote start, when ground is removed it will shut down.

 

https://fortin.ca/download/64041/evo-all_ig_tsa_bi_chr5-skreem-wrangler_e_64041.pdf

 

You will probably also need to connect the purple and purple/white from the evo to the lock and unlock wires of the aftermarket keyless entry unit youve already installed.