could you please reset my evo all flash limit with serial S/N 001A07 253480

Question

My evo all flash limit is stuck at 1 no matter how many times I flash it. I have been trying to install the standalone alarm for 2016 mazda cx5 push to start. I have been following the procedure number 62951. All the 3 lights flashes after the second key is programmed. I have double checked the connection and everything is okay as per the procedure. I have tried several times , but same results . what should I do please.

Answer 1

Hello,

At what step in the 2 key programming do all 3 lights flash?

Do all 3 flash at the same time or do they start to alternate one after the other?

The unit is reset.

Best regards.

Comments

All the 3 flash at the same time. Just after key bypass programming of the second OEM key, Ignition automatically come on then off as per the procedure.Just after this, the light is supposed to flash red and yellow . As per instruction number 13 of the 62951 pdf file. But this the stage I see all the 3 lights flashing at the same time.

---

Turn off settings protection, once off save it in the off position.

Then perform a master reset on the unit in the vehicle following these instructions: https://cdn.fortin.ca/en/download/61931/61931.pdf

Once that is done, plug it back into the pc and re enable options C1, D1 and D6. Do not touch any other options.

Then re attempt programming in the vehicle.

---

Hello Derek,

I have tried the option above but still same output. Not sure what to do.

---

What is the entire vin number to the vehicle?

 

Next try flashing firmware 84.12 into the unit and re attempt programming in the vehicle again.

---

VIN - JM3KE4CY3G0874086

Above is the VIN of the car.

---

I have tried the above but still no good results.

---

Next please flash version 71.47 into the evo and re attempt programming.

If that does not work your next step will be to phone into support when you have the vehicle and module and flasher on hand so an agent can go over it with you.

1-877-336-7797 mon-fri

8am 6 pm est.

 

Best regards.

---

Amazing, just after the reprogramming of the key worked with flash version 71.47, with the red and yellow lights flashing altenately. I tried to use the decrytor service, but it says decrytors limit has been reached for this car. Any help. Thank you