Remote start only works with key in.

Question

2010 Subaru Forester. Evo-All and Python 4105 remote start.

The car will not remote start without the key in the ignition. It will go through the process, but the starter never engages. I've checked that the IMO Data wires are properly connected before and after the cut. Checked voltage on all CAN connections.

Evo programmed correctly. Units connected via datalink cable, option F3 programed for Evo. Firmware checked and updated to 79.49 for evo-all. Remote start key fob operates locks correctly. 2nd starter wire connected to python using relay as shown in evo-one guide 57441.