3-locks-to-start stopped working after module flashing / added RF kit

Question

Hi,

My evo-all used to working with the OEM key 3-locks-to-start before.

Then I bought the RM 942 RF KIT.

Flashed the evo-all to 78.70, and the antenna to 1.05 already.

I flashed my evo-all to match my vehicle:

* Toyota Sienna 2020

* Standalone installation

* Standard connection

* push to start

* No alarm

 

 

Enabled the H&H2 option and paired the RF kit keys successfully, with the hlpe from https://www.fortin.ca/en/qa/121700/rm-942-buttons-have-wrong-functions

Followed the DCRYPTOR PROGRAMMING PROCEDURE. All leds are off at step 5 indicating it's already programmed.

After all these, it seems everything are connected and paired correctly. The lock/unlock buttons on the RF kit work properly.

 

BUT neither OEM key 3 locks nor RF kit key remote start ([+] + lock) could remote start the car. After pressing the OEM key 3 locks, I can hear the evo-all or some car electric component making the small clicking sounds, and the car turn signal lisghts had a couple of follow-up flashing, which seems to me like the evo-all is indeed carrying out the remote start procudre. But car does nothing, no cranking sound at all.

 

Did I miss anything again?

 

One weird thing to me is that I think I installed my evo-all with a T-harness, but in the Flash Manager software, after I select TOYOTA, SIENNA 2020, PUSH-TO-START, STANDALONE, there is only STANDARD CONNECT option but on T-HARNESS CONNECTION option in the connection type selector. Is this the problem?

 

Thanks,

Gerry

 

Answer 1

The problem came from programming an already programmed module after simply pairing the remotes. Reprogramming the module was not needed. 

 

Please reset and start over from scratch.

1. Reset the EVO
2. Ensure required options are enabled.
3. Reprogram the EVO to the vehicle. This should require running the dcryptor. 
4. Pair the remotes
5. enjoy :D

Reset procedure can be found here: https://fortin.ca/en/qa/50193/faq-how-do-i-reset-my-evo-all

 

Comments

Also note, we do not list a Tharness for this vehicle https://fortin.ca/en/vehicles/toyota/sienna/2020-push-to-start/

 

It's possible though that if you purchased through a third party reseller, that they make their own t-harnesses.

---

Hi Robert,

Thanks for your reply! I proably tried too many times previously by myself. Now I got this error in the Flash Manager:

"DCRYPTOR'S LIMIT HAS BEEN REACHED FOR THIS CAR"

Could you please help to reset this limiit for me? My evo-all SN is 001A07425927.

Thanks,

Gerry

---

After following the reset and start over from scratch steps Robert mentioned above. Everything works now!!!

Thank you very mucn, Robert!