Manual Transmission Prog. & Wiring Ford Focus

Question

Hi,

Looking for some information before I pull the trigger on buying a Fortin remote start kit. I have a 2012 Ford Focus, Manual Trans. with Push-To-Start.

When I enter the vehicle details it only has a guide for Automatic trans, but the EVO-ONE-411 is compatible with manual trans just no guide.

Is there a T-Harness that works with the push to start & manual trans, and would this EVO-ONE-411 be able to be programmed for the manual remote sequence on this car? How much extra wiring is needed? I assume I also have to perform a clutch switch bypass with relays.

Thanks for the help in advance, hoping to get this working before the snow starts flying :)

Answer 1

Hello,

There is no t harness available for this vehicle. Hardwire only.

You would follow the information online then wire in the clutch bypass yourself.

Please note Fortin does not assist end consumers who attempt to install on manual transmission vehicles. Installation by a qualified techician is strongly recommended.

https://fortin.ca/en/vehicles/ford/focus/2012-push-to-start/compatibility/

Best regards.