2009 ford fusion evo all thar for4 vehicle take over

Question

Just installed a evo all thar for4 kit on my 2009 ford fusion the install went well and the unit remote starts but will not turn off with the brake pedal and allow vehicle take over,the only way that I can turn it off is via the button press sequence used to start it.

Looking at the wiring diagram i think the only wire that I had to splice together was the 2 yellow wires unless im missing something which is entirely possible.

Answer 1

Hello,

Fortin does not list stand alone for this vehicle for this very reason.

 

You can either turn on option D3 door open shut down or install an evo-one and hardwire brake if you want take over. Evo-all in stand alone is not supported for the 2009 fusion.

 

Best regards.

Comments

For the 2009 Fusion Std key, it does have a check mark for both the FORT1 and 4 that it does support key takeover, from the results chosen in the drop-down menu. Does this information also pertain to the 2006 thru 2008 Fusion also? So, it's the 2006 thru 2009 Fusion that doesn't support key takeover? Thank you.