Programing won’t flash 10 times help

Question

2020 forester when programming when I start the vehicle it won’t rapidly flash 10 times. Help

Answer 1

Hello,

If a SUB3 t-harness was used then you would want to verify the imo connection.

Also make sure the jumper was plugged into connector B and connector A was plugged into the t-harness section that goes to the fuse box as indicated in the installation guide: https://cdn02.fortin.ca/download/99391/EVO-ONE_IG_RTO_BI_SUB1-SUB3_FORESTER_2019_KEY_A_99391.pdf

Best regards