Question

2011 Chevy Cruze won't start. I've made the necessary connections and it should be programmed. Locking, unlocking, and trunk work fine. When I hold down the start button for 3 seconds, lights and cluster turn on. When I try to hold it again, it might start for 1 minute 30 seconds or sometimes tries to crank but turns off. Then comes back on and might start. But if it does, it's no more than 1 minute 30 seconds. Do I need to make changes in programming option 4? Or should I try a hard reset?

Answer 1

What exactly are you installing? Sounds like a tach programming issue though.

Comments

Oh sorry, I'm installing remote start. LC-Pro with Evo All. Are you saying I should change the tach mode?

---

TRy following the tach learning procedure in the LC-PRO.

---

What does it mean by TAch source? Is there a wire I should be splicing into?

 

And which one should I be using?

1. Tach Reference Mode

---

Option 1 monitors Tach.

You do not have to wire anything else since the EVO-ALL reads tach through the vehicles Can network and tells the remote starter through datalink if tach is on or off.