2012 Altima PTS starts after program then nothing. 3 flash parking light code.

Question

Hook control unit up, vehicle starts remotely fine. After that, further attempts fail. Module lights up in correct order but doesn't start.

Answer 1

What is the service number to the module?

When the car doesnt remote start what do the brake lights do?  also what do the leds on the module do?

Answer 2

Service # is 001A06 718589

Starting is sporadic, it works occasionally.The LEDs on it flash red when it doesn't start. When it does, they all light in a different sequence. I'd have to video to tell exactly. The brakes lights come on for a few seconds either time, when it doesn't or does start. Thanks.

Comments

Please enabled the follwing options:

A1 through A11.

C1 & D1

Turn off all other options. Unless you are using a rf kit, then leave your rf sections as is.

Save and the re test.

---

Same thing, starts first time after changing options, then not again.

---

When it doesnt start after you attempt it a second try do the brake lights turn on?

Does the ignition light up?

Do you get a key error in the dash?

---

The brake lights and pts button do light up with the attempt. I do not see an error on the dash.

---

does the dash light up?

Doesnt sound like it....How did you connect the white.black wire ?

---

The white black wire is connected to the PTS brown wire. Turn signal lights on the dash flash but nothing else. I used T-tap connectors for all connections. Thanks again for your help.

---

T-taps are the number 1 cause of intermittent problems.

Poke and twist / military splice is the best most reliable type of connection. bare wire to bare wire connection.

---

So, I've done all of these and still get no start at all anymore. Thanks for help. C1 and D1 are only options on. All lights on dash and unit light appropriately