Questions & Answers

How to set up EVO-GMT4 to work with my crimsropper sp-502 remote starter on my 2011 chevy silverado?

0 votes
I installed the EVO-GMT4 as a standalone bypass module that's when you remote start the truck by pressing the oem remote lock button 3X and it worke fine, now I'm trying to install a aftermarket remote start (crimestopper remote starer sp-502). I installed and programmed and flashed the bypass module with the aftermarket remote starter exactly as the installation instructions from the fortin website shows, dash lights up but no crank, my question is, is there a wire o wires that I'm missing or a setting on the flashlink manager.(years ago I did the same installation with evo all and crimestopper remote starer sp-502 on a 2011 chevy malibu with no problem.
posté Avr 17, 2019 dans la catégorie Chevrolet par RAUL MARTINEZ2 (130 points)

2 Réponses

0 votes

This would be the installation/programming guide for those 2 products. 

http://fortin.ca/download/59001/evo-all_ig_thr_bi_gm4_a_59001.pdf

 

If its already starting the vehicle, there should be no need to re program the module, Simply make the wiring chages in the guide and turn off D1. 

 

Please note: unless the sp-502 supports 3x lock to start through the data link, you will loose this functions when you install the crime stopper piece as you will need to disable D1 in the options. 

 

répondu Avr 17, 2019 par derek g (347,430 points)
0 votes

Per our conversion to reset the unit: http://fortin.ca/en/download/61931/61931.pdf

répondu Avr 17, 2019 par Robert T (302,210 points)
...