RL1 or RL2 in a 2007 G35 sedan

Question

Having issues with 2007 g35 sedan(PTS) using EVO-NIST1.  Car will randomly start after 3x lock.  Noticed that sometimes the brake lights will liight up after the 2x lock.  Currently using the RL2 in the harness, but the PTS wire is brown and not blue like the diagram states(Guide #90131 is what comes up when I put in the car info.).  When it does start, factory remote will still work to lock/unlock doors.   Was hooked up using RL1 in the beginning but I believe I was following the wrong info.  Car infotainment would light up, then the dash, but it wouldn't start at all.

Answer 1

Car will randomly start after 3x lock.  Noticed that sometimes the brake lights will liight up after the 2x lock.

 

Although you can use the EVO-ALL stand alone starter (meaning no third party starter required) on the 2007-2008 G35/Altima, we do not list 3xlock as a feature.  https://fortin.ca/en/vehicles/infiniti/g35/2007-push-to-start/

An RF-KIT is listed as required.

 

it could be RL1 or RL2, depends on to many factors of trim level. Whichever ones turns on the brake lights. 

Comments

I'm not debating you, but is that just for this particular year?  And why is 3x lock listed in the settings in the stand alone config on page 2?  I just noticed that the blue light blinks twice when I press the lock button on the remote once.

---

2007 and 2008 G35 & Altima. Both those cars are not supported for 3xlock.

 

 And why is 3x lock listed in the settings in the stand alone config on page 2?

It's available on all the other cars in that guide. Product compatibilty is listed on the website. 

 

 I just noticed that the blue light blinks twice when I press the lock button on the remote once.

Exactly. It should be once per lock press. You can probably get away with it by enabling D1.1 Lock-Unlock-Lock. Also turning