Non G key 2010 Toyota Tundra crank but won't start ax-one with ttoy2 harness

Question

I'm connect everything using guide #19541. Double check and triple check the connection. I'm even trying the sil data wire. What am I missing? Bad unit? PLEASE HELP

Answer 1

At the moment, I do not see option 2.4 enabled in your remote starter settings. Option 2.4 needs to be enabled. I would also enable option 20.2 Tachless.

---

If the above fails, my suggestion is.... forget about can-bus. Can-Bus compatibility on non-g key vehicles is not always functional until we can get some 2010 and lower vehicles back in shop (we did not offer can-bus in 2010).

 

So.

1. Remove the RED connector
2. Master reset the bypass side of the EVO-ONE.  (procedure to reset here)
3. Reprogram the EVO-ONE as per guide 19541 without connecting the RED connector
4. Test remote starting.

 

If this works, which it will, you will need to connect the analog wires for lock, unlock, hood pin, and foot brake from the evo-one directly to the car since we removed can-bus.